Pavetuf – Sealantss
Unlike most other sealants, the water based Pavetuf Invisible, Satin and Gloss Sealants are unique and fully breathable, allowing efflorescence to escape, whilst preserving the look of the paving and acting as a barrier to protect it against staining. The Pavetuf Invisible, Satin and Gloss sealants can be applied as soon as the patio/path/driveway is completed.
- Sand Crete
Enquire about our sealants
Pavetuf – Cleaners
After installation it is common for salt/efflorescence to rise through and sit on the surface of stone paving, causing unsightly white marks. The Salt Eraser is a specific cleaning agent for the removal of salt/efflorescence from stone paths, drives and patios. As it penetrates deep into the stone it also prevents the reappearance of salt/efflorescence.
- Salt Eraser
- Green-Off Cleaner
- Rust Remover
- General Cleaner
- Deep Cleaner
Enquire about our cleaners
Pavetuf – Mortar Compound
The Jointing Mortar is a professional, rapid setting mortar which provides a contemporary and effective finish to paved areas.
- Gun Metal Grey
- Silver Grey
- Concrete Effect
- Can fill joints from 3 – 50mm and joint depths of up to 200mm
- Drive on within 4 hours
- Walk on within 1 hour
- Mixes quickly on site
- Very Strong -49.6N/mm
Enquire about our mortar compound
Pavetuf – Joining Compound
An easy to apply all weather Jointing Compound, available in a range of three colours.
- Use in wet and dry conditions and in tempratures as low as -5 degrees
- Jointed areas can be walked upon after just 18 – 24 hours
- Use with paving joints as narrow as 3mm and as shallows as 25mm
- No waste, can be re-used
- Easy to apply, durable and eco-friendly
Enquire about our jointing compound
Pavetuf – Priming Slurry
Pavetuf Priming Slurry is a polymer and cementitious slurry, specifically formulated to provide an exceptional bond between a new mortar base and all types of stone and porcelain paving..